pre-vacuum sterilizer autoclave with built-in water tank

Pre-vacuum sterilizer autoclave adopts advanced pre-vacuum technology and precise temperature control system to sterilize and disinfect under high temperature and high pressure, which can effectively remove bacteria, virus and other pathogenic microorganisms on the instruments and ensure the sterility and safety of the articles. It meets the European B standard and passes EN13060 safety test to ensure the quality of equipment and sterilization effect.

Main Features of Pre-vacuum Sterilizer Autoclave

1. Conforms to European Class B standards: This equipment conforms to European Class B sterilization standards and passes EN13060 safety certification, which has efficient sterilization performance and reliable safety.
2. three times pulsation vacuum drying: through three times pulsation vacuum technology, can better exclude the air and moisture in the sterilization cavity, to ensure efficient penetration of steam, thorough sterilization.
3. Vacuum up to -0.9 bar: Adopting high-precision vacuum system, the vacuum can be pumped up to -0.9 bar to enhance the sterilization effect and ensure that even the instruments with internal piping can be sterilized well.
4. Low humidity residue: After sterilization, the residual humidity of the instruments is less than 0.2%, which ensures that the sterilized items are completely dry and avoids bacterial re-growth.
5. Advanced microprocessor control: Equipped with a D16-bit microprocessor to provide precise operation and control, users can easily set and monitor sterilization parameters.
6. BD Test and Vacuum Test Program: Equipped with BD Test and Vacuum Test Program to check the steam penetration and the effectiveness of the sterilization process to ensure that each round of sterilization process meets the standard requirements.
7. Jet steam generator: Jet steam generator ensures the temperature and pressure inside the pot are evenly distributed, improving the sterilization effect and guaranteeing the uniformity of the sterilization process at the same time.
8. wastewater tank full of water alarm: equipped with wastewater tank full of water alarm system, to prevent the return of wastewater caused by secondary pollution, to protect the effectiveness of the disinfection process.
9. digital display and fault alarm: clear digital display interface to facilitate real-time monitoring of the sterilization status of the operator, equipment failure will be automatically alarmed to ensure the safety of the operation and smooth running.
10. double interlock protection door: the door of the equipment adopts double interlock protection design, to ensure that in the case of pressure in the cavity, the door can not be opened, to avoid the safety accidents caused by improper operation.
11. optional built-in printer: you can choose the built-in printer, automatic recording of the sterilization process and date, easy to record and traceability, to meet the compliance requirements.

Advantage

1. High-efficiency Sterilization: The combination of three times pulsating vacuum and jet steam generator effectively enhances steam penetration, ensuring that even instruments with complex shapes and porous structures can be thoroughly sterilized.
2. Intelligent control: the use of advanced microprocessor control system, simple and accurate operation, support for a variety of sterilization procedures, reducing human error.
3. Safety and reliability: double safety protection design (such as door lock, vacuum test, automatic alarm system, etc.) to ensure the safety of the equipment operation, to protect the health and safety of the operator.
4. low humidity treatment: low residual humidity after sterilization, to avoid excessive moisture may cause secondary pollution or corrosion.
5. easy to maintain: with fault detection and alarm function, convenient for operators to find and solve the problem in time, reduce equipment downtime.
6. data traceability: built-in printer and standard test interface for data storage and traceability provides a convenient solution to meet the strict quality management requirements.
7. environmental protection and high efficiency: waste water tank water full alarm system to prevent waste water recycling, reducing the risk of secondary pollution, in line with environmental standards.

Working Principle

The working principle of the pre-vacuum sterilizer autoclave is based on the synergy between vacuum technology and high temperature and high pressure steam. First, the device removes air and moisture from the sterilization chamber through a three-pulsation vacuum process, ensuring that the steam can fully penetrate all parts of the instrument. Subsequently, high-temperature saturated steam is rapidly generated by a built-in jet steam generator and sterilized under high pressure. This steam completely destroys bacteria, viruses and other pathogenic microorganisms on the instruments. Once the sterilization process is complete, the unit automatically cools down and removes wastewater through the waste water tank overflow alarm system, ensuring an efficient and safe sterilization process every time.

Application Areas

1. medical industry: for hospitals, clinics, operating rooms, stomatology and other places, sterilization of surgical instruments, syringes, dressings, etc., to prevent cross-infection and pathogen transmission.
2. pharmaceutical industry: used in the production of pharmaceutical containers, appliances, packaging materials, etc., to ensure that the quality of drugs in line with health standards.
3. laboratory: for scientific research laboratory glassware, culture medium and other experimental equipment sterilization, to ensure the sterility of the experimental environment.
4. dental industry: used for sterilization of dental instruments, to avoid the spread of germs, to ensure the cleanliness and safety of medical equipment.
5. food industry: used for food processing equipment, packaging materials, sterilization, to ensure that no microbial contamination in the food production process, in line with health standards.
6. medical waste treatment: to deal with medical waste generated by the hospital to avoid the impact on the environment and public health.